velocity,V. was obtained by averaging the radial velocities of all microclusters located at the cell periphery during, where t is the elapsed time after the initial cell-bilayer Thiazovivin web contact and Dt = 10 sec. The object-based colocalization algorithm contains two major steps: cluster identification and pairwise cluster matching between two fluorescent channels. The fluorescent clusters were firstly identified by the speckle tracking algorithm. The microclusters in two fluorescent channels are considered as colocalized if their center distance is within the diffraction limit. TCRs accumulated in the cSMAC area were excluded from the analysis for control cells at 5 min due to their distinct signaling properties and the absence of ZAP-70 in this region. The cSMAC region was outlined based on the higher fluorescence intensity by applying an imaging threshold calculated from Otsu’s algorithm. For the direct comparison of the phosphorylation level of pZAP-70 or pCasL between different samples, analysis was done in multiple steps. Cells were first selected manually and outlined in each image. Fluorescence intensities of all pixels at each cell-bilayer contact area were summed and an averaged fluorescence intensity per cell subtracted by background was obtained. Iave of each sample was then normalized to that of the control. PubMed ID:http://www.ncbi.nlm.nih.gov/pubmed/22179927 Supporting Information Calcium imaging T cells were firstly incubated with 1 mM Fura-2-acetoxymethyl ester in serum-free cell media at room temperature for 15 minutes and then in Fura-2 free serum-rich media at 37uC for 20 minutes. After TCR labeling, cells were incubated with DMSO or 20 mM ML-7 at 37uC for 15 min before being injected into the imaging chamber. Images were acquired on a Nikon TE 2000 microscope with a 406 S Fluor objective and a Coolsnap K4 camera. Emission at 510 nm was captured by alternating the excitation wavelength between 340 and 380 nm. The ratiometric value of the Fura-2 AM dye, indicating relative intracellular calcium levels, was obtained by using the program Imaris and a custom Matlab algorithm. and cell edge movement. Time-averaged radial velocities,,V., of all TCR microclusters in a control cell are plotted against the elapsed time after the initial cell-bilayer contact. Cell radii obtained from RICM images are plotted against time. The 
average spreading and contraction velocities, 95 nm/sec and 25 nm/sec, respectively, were calculated by linear fitting. The relative velocities of TCR microclusters, calculated by subtraction of cell edge movement from TCR radial velocities at each time point, are plotted against time. grade flow. Simultaneous total internal reflection fluorescence images of TCR labeled with aTCR Fab and EGFP-UtrCH during the formation of an immunological synapse in a control cell. Time-averaged radial velocities,,V., of all TCR microclusters and EGFP-UtrCH in control cells and cells pretreated with ML-7 are plotted against the elapsed time after the initial cell-bilayer contact. Scale bars: 5 mm. Speckle tracking and image analysis The custom speckle tracking algorithm as described previously, was used to identify the locations of speckles based on the fluorescent intensity gradient within the images. Following identification, nearest neighbors of speckles in consecutive frames Myosin IIA in Immunological Synapse Formation versus the radial distance from the center of the immunological synapse. Data are representative of 3 independent experiments. Scale bars: 5 mm. Acknowledgments Th
